Product parameter

1070 aluminum has high plasticity, corrosion resistance, electrical conductivity and good thermal conductivity, but low strength, not through heat treatment to strengthen, cutting is not good, can accept contact welding, gas welding. Make use of its advantages to manufacture some structural parts with specific performance, such as aluminum foil gaskets and capacitors, electronic tube isolation net, wire, cable protection sleeve, net, wire core and aircraft ventilation system parts and decorative parts. And 1070 aluminum similar to ask 1070A aluminum, industrial pure aluminum, with the general characteristics of aluminum, small density, good electrical and thermal conductivity, corrosion resistance, good plastic processing performance, can be processed into plate, belt, foil and extruded products, can be gas welding, argon arc welding, spot welding. Industrial pure aluminum cannot be strengthened by heat treatment, but its strength can be improved by cold deformation, and the only form of heat treatment is annealing.

Material introduction

Aluminum has a rare variety of valuable properties. It is one of the lightest metals in the world: it is almost three times lighter than iron, but it is also extremely strong, extremely flexible, and resistant to corrosion because its surface is always covered with an extremely thin but very strong oxide film. It does not magnetize, is a good electrical conductor, and can form alloys with almost all other metals.

Aluminum can be easily processed by pressure in both hot and cold states. It can be rolled up, pulled and stamped. Aluminum doesn't catch fire, doesn't require special paint, and unlike plastic, it's not toxic. It is also very flexible, so it can be used to make sheets with a thickness of only 4 microns, as well as ultra-fine wire. The ultra-thin foil, made of aluminum, is three times thinner than a human hair. In addition, aluminum is more cost effective than other metals and materials.

Because aluminum easily forms compounds with other chemical elements, a wide variety of aluminum alloys have been developed. Even a very small amount of the mixture can dramatically change the properties of the metal, making it available for use in new areas. For example, in everyday life, you can find aluminum mixed with silicon and magnesium on the road, namely in the aluminum alloy wheels, engines, chassis and other components of modern cars. As for aluminum-zinc alloy, you probably have it in your hand right now, as this alloy is widely used in the production of mobile phones and tablets. At the same time, scientists continue to develop new aluminum alloys.

Modern construction, automotive, aviation, energy, food and other industries are inseparable from aluminum. In addition, aluminum has become a symbol of progress: all cutting-edge equipment and vehicles are made of aluminum.

It would seem that the combination of qualities listed above is enough to make aluminum the first choice in industry, however, there is another equally important property: aluminum can be reused again and again. Aluminum and its alloys can be melted and reused without compromising their mechanical properties. Scientists estimate that 1 kg of recycled aluminum cans can save up to 8 kg of bauxite, 4 kg of various fluorides and up to 15 KWH of electricity.

About 75% of the aluminum produced when the aluminum industry existed is still in use today.

Product testing

We know that in the steel industry, quality is the lifeline. As a professional steel manufacturer, we always put product quality in the first place and are committed to providing customers with the best quality and most reliable steel products.
In order to ensure that our products meet international standards and customer requirements, we have established a sound quality management system, from raw material procurement to production and processing, and then to finished product inspection, every link is strictly monitored and controlled. We use advanced production equipment and processes to ensure the accuracy and stability of products.
We know that only excellent quality products can win the trust of customers and market recognition. Therefore, we will continue to uphold the concept of quality first, constantly improve product quality and service level, to provide customers with better quality steel products and services.

Warehouse and delivery show

Beijing Sisno Metals Trade Co.,Ltd has been committed to providing customers with a wide range of product choices. At present, we have a large stock of steel in our warehouses, covering a wide range of specifications and models to meet the diverse needs of different customers.

These stocks of steel are carefully selected by us for high quality products, which undergo strict quality control and inspection to ensure their excellent durability and reliability. We have a complete inventory management system, which can track and manage inventory in real time to ensure that the quality and quantity of products are always maintained in the best condition.

Our extensive inventory means we are able to respond quickly to our customers' needs, shorten lead times and provide a more flexible and convenient service. We are always customer-centric and committed to providing our customers with efficient and reliable solutions to help them achieve their engineering goals.

If you are interested in our stock status or have any questions, please feel free to contact us. We will be happy to provide you with more details and support to meet your needs.

Product application

Aluminum, that is, aluminum alloy steel, is a metal material made of aluminum added to steel as an alloying element. Aluminum is used in a wide range of applications, and the following are some detailed application areas:

Aerospace: Aluminum has light weight, high strength and good corrosion resistance, so it is widely used in the aerospace field. For example, aircraft fuselages, engine components, and spacecraft structures may all use aluminum to reduce weight and improve performance.
Automobile manufacturing: Aluminum is also widely used in automobile manufacturing. It can be used to manufacture bodies, engine components, chassis and suspension systems, among others. The use of aluminum can reduce the weight of cars, improve fuel efficiency, and enhance the corrosion resistance of vehicles.
Buildings and structures: Aluminum also plays an important role in the construction sector. It can be used to make Bridges, tall buildings, stadiums and large facilities. Aluminum's high strength and lightweight properties make it ideal for these structures.
Shipbuilding: Aluminum is also used in shipbuilding. Due to its corrosion resistance and light weight, aluminum can be used in the manufacture of hulls, cabins and Marine equipment.
Electronics and electrical: Aluminum is also used in the electronics and electrical industry. It can be used to manufacture wires, cables, connectors and electronic components. Aluminum's electrical conductivity and corrosion resistance make it an ideal material for these applications.

In addition, aluminum can also be used in the manufacture of pressure vessels, plumbing systems, sports equipment, furniture and everyday items. With the continuous progress of science and technology and the continuous improvement of aluminum properties, its application areas will continue to expand.

About us

Welcome to Sesino Metal. Beijing Sesino Metal Trade Co., Ltd is an international trading company equipped with extensive experience and excellent reputation in the steel industry for more than 5 years. We are committed to providing customers with high-quality, diversified steel products to the global market. Since founding, we have always adhered to our core values of integrity, professionalism and innovation. Our team consists of a group of experienced industry experts and enthusiastic sales representatives, who have won the trust and praise of our customers with their deep industry knowledge and excellent service attitude.
As one of the world's leading steel products suppliers, we have established solid cooperative relationships with big state-owned steel mills in China, including Tisco, Wisco, Nisco, Shougang, Baosteel, Hunan Valin, and Shandongsteel ect, and many private mills who have more competitive prices. Therefore, we can provide you with a wide range of steel products, including carbon steel, stainless steel, alloy steel, oriented and non-oriented electrical silicon steel , aluminum steel and other metal products etc.
In addition to providing high-quality steel products, we are also committed to providing comprehensive solutions to our customers. Our professional team will provide you with customized procurement solutions, logistics arrangements and after-sales services based on your needs to ensure that you receive worry-free support and protection during the entire transaction process.
We understand that our customers' needs and satisfaction are the keys to our success. Therefore, we will continue to work hard to improve service quality, continuously develop and improve product lines to meet the changing needs of customers. We look forward to establishing a long-term and stable cooperative relationship with you and creating a better future together. Thank you for choosing Sesino Metals, we look forward to working with you to create our brilliance!

Certificate display

We value product quality and customer service feedback, so all our products can accept professional quality inspection by third party testing agencies and can be accompanied by relevant quality certificates

FAQ

Are you having any problems? You can always ask us about your problems, or you can browse the topics below to find what you are looking for.

Are you trading company or manufacturer ?

We are specialized in the production and processing of various carbon steel products, we can also accept custom products of other materials

How long is your delivery time?

It takes around 3-5 days for the regular models, and 7 to 10 working days for the special sizes and processing. It is based on the order quantity and requirement.

Do you provide samples ? Is it free or extra ?

We can provide samples to you for free, but the cost of express delivery will be borne by you.

Do you support customization ?

Yes, we have a full stock of products with a full range of models and a working production line. If you don't have what you want, we can customize it.

Do you accept third party testing ?

Yes, we fully accept the quality inspection of the third party inspection institutions. We attach great importance to the reliability of product quality

What are the advantages of your company?

First of all, we have an absolute advantage in price. Secondly, the quality of products is also strictly controlled.